激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。     

Stochastic evaluation of leakages through holes in wrinkle networks of composite liners

This paper presents a study on stochastic evaluation of leakages through holes in wrinkle networks of composite liners. The statistical parameters of wrinkles are used as indexes to describe the spatial distributions of wrinkles in a wrinkle network and the wrinkle density is modeled as a random field in the proposed approach, which allows the construction of a database about how wrinkles may be distributed in different conditions and provides input parameters for leakage evaluation at the design stage when the site has not been constructed yet and the aerial image of the wrinkle network (AWN) is unavailable. Statistical analyses were performed on wrinkle geometric parameters and wrinkle density of wrinkles from three sites reported in the literature. The procedures of generating random wrinkle networks (RWNs) based on the statistical parameters of wrinkles are introduced. The proposed approach was applied to typical examples and showed sufficient accuracy when compared to the evaluated leakages based on the corresponding AWNs. Wrinkle density is recommended to be modeled as random field.     

电磁场作用下球形磁极辅助研磨弯管内表面研究

弯管弯曲成形后,在弯折处易产生微裂纹、褶皱等表面质量缺陷问题。本文通过采用六自由度机械手拖动电磁场发生装置沿加工轨迹往复运动,电磁场发生装置驱动球形辅助磁极绕管件内壁转动,实现了对弯管内表面的光整加工。在此基础上,通过对弯管轮廓采集及曲线拟合,重新构建了弯管中心线并转换为新的研磨加工轨迹。采用超景深3D电子显微镜和触针式表面粗糙度测量仪对研磨试验前后弯管内表面的形貌和粗糙度进行了对比分析。结果表明,通过重新构建研磨加工轨迹,试验装置有效解决了研磨弯折处的干涉与研磨不均匀等问题。研磨55 min后,表面粗糙度由原始的0.713μm降低到0.194μm,铜合金弯管内表面原始质量缺陷基本去除,表面纹理较为致密均匀。该方法有效避免了未规划研磨轨迹时出现的犁耕等纹理缺陷,提高了弯管的服役可靠性。     

雷电通道水平电场影响因素分析

影响雷电通道产生的水平电场因素众多,分析其影响因素对电力系统的雷电防护具有重要意义。文中利用运动电荷电磁场方程求解得到闪电回击通道的水平电场和方位磁场,并结合C-R 算法,得到了有限电导率地面上方的水平电场。依据运动电荷电磁场方程的特征分析了不同回击速度、不同距离、不同电导率对雷击产生的水平电场的影响。得出以下结论:水平电场随回击速度增大而减小;水平电场波形呈双极性特征且水平距离越大或电导率越小负向偏移越明显。这些研究结论为输电线路雷电过电压计算打下良好的基础。与其他方法相比,本文方法可以避免远距离电磁场计算中的震荡问题和积分方程的奇异问题。     

Broadband bowtie belt nanoantennas

In this article, we study a linear array of bowtie nanoantennas placed between two metallic strips that can work from 800 to 1420 nm (600 nm linewidth), with an electric field enhancement factor close to 20. We study the dynamical change of the position of the electric field enhancement amongst different elements in the array and, at the same time, the effects of dispersion on the scalability of the array elements. A systematic analysis and methodology to produce an array that can operate over a large bandwidth whilst maintaining the electric field enhancement without significant variation is provided.     

New exact solutions of the Tzitzéica-type equations in non-linear optics using the expa function method

One specific class of non-linear evolution equations, known as the Tzitzéica-type equations, has received great attention from a group of researchers involved in non-linear science. In this article, new exact solutions of the Tzitzéica-type equations arising in non-linear optics, including the Tzitzéica, Dodd–Bullough–Mikhailov and Tzitzéica–Dodd–Bullough equations, are obtained using the exp_a function method. The integration technique actually suggests a useful and reliable method to extract new exact solutions of a wide range of non-linear evolution equations.     

Surface Profile Optimization of Yankee Dryer Based on Finite Element Analysis

The deformation and stress distribution of cast iron Yankee dryer caused by outside linear load， inside steam pressure and self-gravity were calculated by numerical simulation with ANSYS software. The deformation curve of the linear load area was obtained and compared with the deformation in the actual working process. The surface profile of dryer was optimized and the deformation and stress of the optimized dryer were calculated and compared with the that of before optimization. In this paper， the method of the surface profile optimization of Yankee dryer was presented．     

高含硫气田集输系统增压模式优化研究

随着高含硫气田的持续开发,气井井口压力逐步低于集输压力,亟需实施集输系统增压运行。采用OLGA软件,以气液两相流、压降预测、耦合传热理论为基础,针对高含硫气田集输管网高程差、气体组分、液气比、管网全尺寸参数等工况条件,建立了复杂山地高含硫湿气集输系统生产运行的数值模型,以集输系统生产历史数据为基础,验证模型准确性并进行修正。考虑单井、多井或单线配置压缩机等情况,根据开发预测的各井压力变化情况,计算集输管网的压力分布及系统能耗,重点分析了单站增压、区域+单站增压、集输干线增压三种模式,最终优选出高含硫气田集输系统增压模式。     

矿用直线振动筛结构故障分析

针对煤矿选煤厂直线振动筛工作过程中出现的结构故障问题,采用有限元仿真与现场测试结合的方法对振动筛出现故障的原因进行了分析研究。介绍了振动筛的主要结构及常见故障,并以某矿选煤厂发生大梁断裂的振动筛为例,对该振动筛进行三维建模和有限元模态分析,分析结果表明:随着模态阶次的增加,振型的变化逐渐由移动转为结构本身的扭曲变形。在该振动筛空载工作状态下,选用本质安全型便携式测振记录仪进行振动测试并处理测试信号,得到该振动筛的工作频率。结合模态分析结果和实际测试结果,判断出空载时频繁运行振动筛是造成其大梁断裂的主要原因。根据故障原因给出维护建议:应当尽量避免振动筛在空载或物料较少的状态下长时间运行;在振动筛投入使用前,应预先了解振动筛的工作状态及可能存在的薄弱环节,尽可能避免结构故障,保证振动筛可靠运行。     

基于有限元的大流量换向阀仿真分析及结构优化

为了提高大流量换向阀的设计能力,该文采用ANSYS仿真平台对大流量换向阀仿真分析及结构优化。研究结果表明:撞击阶段应力集中区域基本出现在二级阀芯径向进油口部位,此时形成的最大应力等于24.26 MPa,明显比682 MPa的材料屈服极限更低。进液阀套达到了271.83 MPa的最大压应力,但明显低于682 MPa的屈服极限,表明壁厚满足设计标准。进液阀套形最大应力出现在阀套内部,跟瞬态冲击条件下最大应力出现区域存在明显差异。二级阀芯最大应力都出现于阀芯部位,完成结构优化之后,二级阀芯的最大应力发生了显著降低,其余各部位的应力也显著减小,可以满足设计标准。